Recubrimiento de superficie nanorresistente – motor industrial (LKW) hasta 20 litros

Latest generation coatings for engines and transmissions

nanoproofed® surface coating industrial engine for commercial vehicles (trucks up to 20L oil household) is a unique innovative research product based on nanotechnology, which cleans and cares for the engine interior (oil circuit) and coats it with a special mixture, creating an economic, ecological and technical benefit arises.

Advantages of nanoproofed® surface coating industrial

• Significant savings in fuel consumption
• Systematic cleaning of the engine interior from all operational contamination
• Regenerating defective areas on the metal surface
• Increasing compression on all cylinders and thus optimizing engine performance
• Increase in oil pressure
• CO/CH and other exhaust gases are reduced significantly
• The service life of the oil is significantly extended
• Reduction of engine vibration and noise level up to 0.5 dB
• Increasing engine life

Further information

How long does it take for a protective coating to form?
The duration of a deposit formation depends on the technical condition of the engine and its parts, on the manufacturing or assembly quality and the nature of the metal or material and the conditions and duration under which the engine works. A first improvement occurs after just 15 minutes of engine running, a significant one after an hour (approximately 50% to 70% of the desired optimum), and reaches the optimum after 10 to 50 hours. (depends on the degree of pollution).
Interaction of nanoproofed® surface coating industrial with other additives and modifiers
The nanoproofed® surface coating industrial mixture removes all substances and film layers from the surface of the stressed parts that are plaguing the metal and is fed through the oil into the oil filter and absorbed there. We therefore recommend changing the oil filter after 200 km after filling in nanoproofed® surface coating industrial.
What distinguishes nanoproofed® surface coating industrial from engine oil additives?
The nanoproofed® surface coating industrial mixture does not change the chemical and physical properties of the oil. The use of the oil is three to five times longer.
How long does the effectiveness of nanoproofed® surface coating industrial last?
The covering is sufficient for approx. 100,000 km of driving or for 5 oil changes.